Tag Archives: Speed 400

Azarr M-72 Lite Micro Antenna for 72MHz RC Receivers Only 7in, 0.375g The AZARR M72 L microantenna was designed for use in radio controlled aircraft. This 7″ micro antenna is designed to eliminate the trailing 39 inch wire antenna that comes with most RC receivers. Because this Azarr micro antenna is only 7 inches long vs the standard 39 inches there will be less drag on your airplane. When properly installed, the AZARR microantenna performs just as well as the original receiver antenna. Azarr M-72-Lite Micro Antenna Specifications * Length: 7 in (178mm) * Weight: 0.01 oz (0.375g) * Frequency: 72 MHz * Color: yellow * Includes 0.25 in yellow heat shrink * Requires soldering to install on most receivers * Designed for use in: electric indoor, park flying and speed 400 rc aircraft How to Install This Azarr M-72 L Micro Antenna 1. Cut your original receiver antenna 1 to 3 inches from where it enters the receiver case 2. Strip 1/8 inch from the end of the original receiver wire 3. Solder* the pre-stripped bare wire on the yellow Azarr M-72 microantenna to the stripped end of your receiver antenna. 4. Use the supplied yellow heatshrink tubing around the soldered area to insulate the connection 5. Stretch the Azarr M-72 lite micro antenna to full length. 6. Mount the antenna away from metal and carbon objects 7. Spot glue or tape antenna to balsa or foam surface 8. Do not paint antenna * Note: Ror RFFS receiver systems, no soldering is required. Simply plug this Azarr M-72-Lite micro antenna directly into the receiver jack.