Tag Archives: Rotor Diameter

GYRO Specter 3.5CH Electric RTF Remote Control RC Helicopter (Color May Vary)

41PjiWc09GL GYRO Specter 3.5CH Electric RTF Remote Control RC Helicopter (Color May Vary)

Posted in RC Toys | Tagged , , , , , , , , , , , , , , , , , , , , , , , , | Leave a comment

Sky Titan 3CH Land And Sky Electric RTF RC Helicopter

41iETvfrGKL Sky Titan 3CH Land And Sky Electric RTF RC Helicopter

Features

  • 3 Channel Control
  • IR Transmitter
  • Switches From Land To Sky Mode
  • Ready To Fly
  • Charges Off Transmitter

Product Description

Introducing the Sky Titan 3CH Land And Sky Electric RC Helicopter from World Tech Toys. Great for people of all skill levels, this bad boy features a coaxial rotor and a single rear rotor for precise control. The 3 channel control will allow you to go forward, backward, up, down, left, right and hover. What really makes the Sky Titan stand out is the new land and sky feature. Flip the switch on the transmitter to running mode and you can drive the Sky Titan on the ground like a car making it a 2 in 1 RC toy. This product is ready to fly out of the box, there is no assembly required. Just put in 6 AA batteries into the transmitter/charger and charge the helicopter and you’re good to go. Be the coolest kid on the block by getting the Sky Titan 3CH Land And Sky Electric RC Helicopter!

Posted in RC Toys | Tagged , , , , , , , , , , , , , , , , , , , , , | Leave a comment

The Newest DH 9060 3 Channel Air Overlord RC Helicopter w/LED Lights & Balance Bar Spinning Lights

41liaM8PcKL The Newest DH 9060 3 Channel Air Overlord RC Helicopter w/LED Lights & Balance Bar Spinning Lights

Features

  • Full function 3 channel radio control (Left /Right, Forward/Backward, Hover, and Lands). 3 channel digital proportional control.
  • Bright flashing muti-color LED tail lights with attractive colorful spinning rotor blade lights. Unique material withstand crashes.
  • 2 powerful 180 main motors + N20 tail motor. Newly designed super strong crashworthy propeller.Altitude and rotor speed control.Flight stabilizing system.
  • Up to 200 ft radio control range. Ready To Fly, Easy To Fly .
  • Length: 24 inches. Main Rotor Diameter: 18.5 inches. Battery: 9.6V 800mAh Ni-MH battery. Flight Time: 10 minutes.

Product Description

Package Include: Helicopter (100% assembled). 3 Channel Radio Remote Controller. Rechargeable 9.6V 800mah Ni-MH Battery for Helicopter. AC wall battery charger . English Manual. Frequencies May Vary!
Suitable for large indoor areas and outdoor flight in zero wind conditions. Simply remove from the box install charged batteries and your ready to go! The high capacity NI-MH battery will give 10 minutes (approx) of flight time.

Posted in RC Toys | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , | Leave a comment

Silver Air Hogs R/C Havoc Heli Mini Electric Infrared RC Helicopter by SpinMaster

315u fPL UL Silver Air Hogs R/C Havoc Heli Mini Electric Infrared RC Helicopter by SpinMaster Silver Air Hogs R/C Havoc Heli Mini Electric Infrared RC Helicopter by SpinMaster Silver and Blue Havoc Heli mini infrared indoor RC Helicopter. These Havoc Helis are the hottest micro rc helis from Air Hogs / SpinMaster. Fly your Havoc Helicopters indoors only. Requires 6AA batteries (sold separately) for the remote controller (transmitter). Use alkaline AA batteries only. The remote control doubles as the charger for the rc helicopter. Charge time is approx 15 – 20 minutes. Flight time 5 – 9 minutes. Air Hogs Havoc Heli rc helicopters can turn left and right, fly up and down and fly forward at a constant rate. Try adding tiny amounts of weight to the nose to cause the havoc rc helicopter to fly forwards faster. Add tiny amounts of weight to the tail to fly forward slower or cause the heli to hover in place. — Specifications for Air Hogs R/C Havoc Helis — * Color: Silver and Blue * Style: Havoc Heli * Brand: Genuine Silverlit (SpinMaster, Air Hogs R/C) * Two channel Infrared transmitter * Powerful 50mAh 3.7V Rechargeable Lithium Polymer battery * Battery charger built into transmitter * Charge Time: 15 – 20 minutes * Flight Time: 5 – 9 minutes (on a full charge) * Rotor Diameter: 5.2 in (13.2cm) * Length: 6.5 in (16.7cm) * Weight: 0.4oz (11g) * Requires: 6 AA batteries (alkaline) for transmitter (sold separately)

Posted in RC Toys | Tagged , , , , , , , , , , , , , , , , , , , | Leave a comment

12 Firefly RC Helicopter Replacement Parts Kits: Rotor Sets, Spacers, C-Clips, Tail Fins + Ballasts

41NkPjXQJiL 12 Firefly RC Helicopter Replacement Parts Kits: Rotor Sets, Spacers, C Clips, Tail Fins + Ballasts 12 Firefly RC Helicopter Replacement Parts Kits: Rotor Sets, Spacers, C-Clips, Tail Fins + Ballasts 12 replacement parts kits for the Firefly RC helicopter made by Interactive Toy Concepts. Each kit includes a rotor set, two spacer sets, two c-clips, two foam ballasts, and a tail fin. The rotors fit the Firefly or Micro Mosquito. It is good to keep a spare set of rotors on hand as a backup so you can keep flying, even after a crash. Includes: Rotor Set, Two Spacer Sets, Two C-clips, Two Foam Ballasts, Tail Fin and Sticker. Technical Information: 1 Upper and 1 Lower rotor, Diameter: 6.375″ (162mm), Weight: 0.21oz (6g), Material: Plastic and Carbon Fiber. These rotor blades will only fit Firefly and Micro Mosquito RC Helicopters. Rotor Blade Replacement Instructions: 1) The rotors are held in place by a short rubber tube at the top of the main drive shaft. Pull gently to remove this tube. 2) Slide both rotors up and off, along with the plastic spacer that keeps the two rotors separated. 3) When replacing the rotors, first slide on the lower rotor (the one with the notched shaft on the bottom). 4) Next, slide the plastic spacer shaft over the rotor shaft. 5) Now slide on the upper rotor. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order to slide into place. This should not require any force to do when the parts are correctly oriented. 6) Lastly, reattach the rubber tube. NOTE: These rotor blades will NOT fit Bladerunner or Bladerunner Search and Rescue.

Posted in RC Toys | Tagged , , , , , , , , , , , , , , , , , , , | Leave a comment

Blue + Orange Air Hogs R/C Havoc Stinger Mini Electric Infrared RC Helicopter by SpinMaster

31m0kPByWGL Blue + Orange Air Hogs R/C Havoc Stinger Mini Electric Infrared RC Helicopter by SpinMaster Blue + Orange Air Hogs R/C Havoc Stinger Mini Electric Infrared RC Helicopter by SpinMaster Blue and orange Havoc Stinger mini infrared indoor RC Helicopter. These Havoc Stingers are the latest micro rc helis from Air Hogs / SpinMaster. Their insect-like appearance is ultra-cool, especially with their glowing LED eyes and detailed insect wing styled rotor blades. Fly your Havoc Stinger indoors only. Requires 6AA batteries (sold separately) for the remote controller (transmitter). Use alkaline AA batteries only. The remote control doubles as the charger for the rc helicopter. Charge time is approx 15 – 20 minutes. Flight time 5 – 9 minutes. Air Hogs Havoc Stinger rc helicopters can turn left and right, fly up and down and fly forward at a constant rate. Try adding tiny amounts of weight to the nose to cause the havoc stinger to fly forwards faster. Add tiny amounts of weight to the tail to fly forward slower or cause the stinger to hover in place. — Specifications for Air Hogs R/C Havoc Stingers — * Color: Blue and Orange * Style: Havoc Stinger * Brand: Genuine Silverlit (SpinMaster, Air Hogs R/C) * Two channel Infrared transmitter * Powerful 50mAh 3.7V Rechargeable Lithium Polymer battery * Battery charger built into transmitter * Charge Time: 15 – 20 minutes * Flight Time: 5 – 9 minutes (on a full charge) * Rotor Diameter: 5.2 in (13.2cm) * Length: 6.5 in (16.7cm) * Weight: 0.4oz (11g) * Requires: 6 AA batteries (alkaline) for transmitter (sold separately)

Posted in RC Toys | Tagged , , , , , , , , , , , , , , , , , , , | Leave a comment

6 Micro Mosquito RC Helicopter Replacement Parts Kits: 6 Rotor Sets, 6 Tail Propellers, Spacers, Stoppes, Locking Pins

41eZWfHs6KL 6 Micro Mosquito RC Helicopter Replacement Parts Kits: 6 Rotor Sets, 6 Tail Propellers, Spacers, Stoppes, Locking Pins 6 Micro Mosquito RC Helicopter Replacement Parts Kits: 6 Rotor Sets, 6 Tail Propellers, Spacers, Stoppes, Locking Pins 8 replacement parts kits for the Micro Mosquito RC helicopter made by Interactive Toy Concepts. Each kit includes a rotor set, tail propeller, two spacer sets, two c-clips/locking pins. The rotors fit the Firefly or Micro Mosquito. It is good to keep a spare set of rotors on hand as a backup so you can keep flying, even after a crash. Includes: Rotor Set, Tail Propeller, Two Spacer Sets, Two C-clips/Locking Pins. Technical Information: 1 Upper and 1 Lower rotor, Diameter: 6.375″ (162mm), Weight: 0.21oz (6g), Material: Plastic and Carbon Fiber. These rotor blades will only fit Firefly and Micro Mosquito RC Helicopters. Rotor Blade Replacement Instructions: 1) The rotors are held in place by a short rubber tube at the top of the main drive shaft. Pull gently to remove this tube. 2) Slide both rotors up and off, along with the plastic spacer that keeps the two rotors separated. 3) When replacing the rotors, first slide on the lower rotor (the one with the notched shaft on the bottom). 4) Next, slide the plastic spacer shaft over the rotor shaft. 5) Now slide on the upper rotor. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order to slide into place. This should not require any force to do when the parts are correctly oriented. 6) Lastly, reattach the rubber tube. NOTE: These rotor blades will NOT fit Bladerunner or Bladerunner Search and Rescue.

Posted in RC Toys | Tagged , , , , , , , , , , , , , , , , , , , | Leave a comment

12 Micro Mosquito RC Helicopter Replacement Parts Kits: 12 Rotor Sets, 12 Tail Propellers, Spacers, Stoppes, Locking Pins

41LxD1egHBL 12 Micro Mosquito RC Helicopter Replacement Parts Kits: 12 Rotor Sets, 12 Tail Propellers, Spacers, Stoppes, Locking Pins 12 Micro Mosquito RC Helicopter Replacement Parts Kits: 12 Rotor Sets, 12 Tail Propellers, Spacers, Stoppes, Locking Pins 12 replacement parts kits for the Micro Mosquito RC helicopter made by Interactive Toy Concepts. Each kit includes a rotor set, tail propeller, two spacer sets, two c-clips/locking pins. The rotors fit the Firefly or Micro Mosquito. It is good to keep a spare set of rotors on hand as a backup so you can keep flying, even after a crash. Includes: Rotor Set, Tail Propeller, Two Spacer Sets, Two C-clips/Locking Pins. Technical Information: 1 Upper and 1 Lower rotor, Diameter: 6.375″ (162mm), Weight: 0.21oz (6g), Material: Plastic and Carbon Fiber. These rotor blades will only fit Firefly and Micro Mosquito RC Helicopters. Rotor Blade Replacement Instructions: 1) The rotors are held in place by a short rubber tube at the top of the main drive shaft. Pull gently to remove this tube. 2) Slide both rotors up and off, along with the plastic spacer that keeps the two rotors separated. 3) When replacing the rotors, first slide on the lower rotor (the one with the notched shaft on the bottom). 4) Next, slide the plastic spacer shaft over the rotor shaft. 5) Now slide on the upper rotor. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order to slide into place. This should not require any force to do when the parts are correctly oriented. 6) Lastly, reattach the rubber tube. NOTE: These rotor blades will NOT fit Bladerunner or Bladerunner Search and Rescue.

Posted in RC Toys | Tagged , , , , , , , , , , , , , , , , , , , | Leave a comment

8 Micro Mosquito RC Helicopter Replacement Parts Kits: 8 Rotor Sets, 8 Tail Propellers, Spacers, Stoppes, Locking Pins

41uKThmx9LL 8 Micro Mosquito RC Helicopter Replacement Parts Kits: 8 Rotor Sets, 8 Tail Propellers, Spacers, Stoppes, Locking Pins 8 Micro Mosquito RC Helicopter Replacement Parts Kits: 8 Rotor Sets, 8 Tail Propellers, Spacers, Stoppes, Locking Pins 8 replacement parts kits for the Micro Mosquito RC helicopter made by Interactive Toy Concepts. Each kit includes a rotor set, tail propeller, two spacer sets, two c-clips/locking pins. The rotors fit the Firefly or Micro Mosquito. It is good to keep a spare set of rotors on hand as a backup so you can keep flying, even after a crash. Includes: Rotor Set, Tail Propeller, Two Spacer Sets, Two C-clips/Locking Pins. Technical Information: 1 Upper and 1 Lower rotor, Diameter: 6.375″ (162mm), Weight: 0.21oz (6g), Material: Plastic and Carbon Fiber. These rotor blades will only fit Firefly and Micro Mosquito RC Helicopters. Rotor Blade Replacement Instructions: 1) The rotors are held in place by a short rubber tube at the top of the main drive shaft. Pull gently to remove this tube. 2) Slide both rotors up and off, along with the plastic spacer that keeps the two rotors separated. 3) When replacing the rotors, first slide on the lower rotor (the one with the notched shaft on the bottom). 4) Next, slide the plastic spacer shaft over the rotor shaft. 5) Now slide on the upper rotor. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order to slide into place. This should not require any force to do when the parts are correctly oriented. 6) Lastly, reattach the rubber tube. NOTE: These rotor blades will NOT fit Bladerunner or Bladerunner Search and Rescue.

Posted in RC Toys | Tagged , , , , , , , , , , , , , , , , , , , | Leave a comment

Mini RC Helicopter

41s02kKNsXL Mini RC Helicopter Mini RC Helicopter The incredibly small Micro RC Helicopter is the Smallest and Lightest Micro R/C Helicopter in the World! It is similar to the Picco Z helicopter. Measuring only six inches long and weighing a mind blowing 10 grams, the virtually pocket size Micro RC Helicopter is a Fascinating flying machine that is very stable and easy to fly in the smallest of spaces. The Micro RC Helicopter is so small, so miniature, that it fits right in the palm of your hand! *** Fly up to 3 helicopters together. *** Main Rotor Diameter: 5.25inches (130mm) Length 6.5inches (170mm) excluding rotors. Rear Rotor diameter 1.25inches (30mm) Helicopter weight: Only 10g, including Li-Poly battery Rechargeable Flight Battery: High capacity integral Lithium Polymer battery Charger: Integral Transmitter/Charger supplied with LED indicator/Auto shut off. Simply plug in and charge, with easy to use connections Flight duration: 12 to 15 minutes Charge time: 20-30 minutes for full charge Ready To Run: Supplied completely assembled and ready-to-fly, with pre-installed 2 Channel Proportional Infra Red Control System Range: Up to 100 feet (30 meters). Frequency: Infra Red Control System – Bands A, B & C allow up to three models to be flown at the same time Box Dimensions: 360 x 160 x 100mm Box Weight: 400g
Customer Review: cheap chinese junk being sold under revolving shadow names
Avoid this. Breaks easily, can’t be repaired, no response from seller/manufacturer. Seems to be being sold by rapidly changing fronts.

Posted in RC Toys | Tagged , , , , , , , , , , , , , , , , , , , | Leave a comment